LD-1232 Low Shrinkage and low Odor MMA Structural Adhesive for Metal
Third generation, all-purpose, two-part 10:1, low shrinkage & low odor MMA structural adhesive for structurally bonding metal without primer needed.
Products Details
LD series MMA structural adhesive
MMA adhesive | Description | mixed Color | Ratio | Viscosity (cps) | Working time (minutes) | Fixture time (minutes) |
LD-0518 | Low shrinkage, low odor | Grey, Blue | 10:1 | A: 100,000 - 130,000 | 5 | 18 |
LD-1232 | Low shrinkage, low odor | Grey, Blue | 10:1 | A: 100,000 - 130,000 | 12 | 32 |
LD-2054 | Low shrinkage, low odor | Grey, Blue | 10:1 | A: 100,000 - 130,000 | 20 | 54 |
Typical Characters
Working Time at 24℃: 12 minute
Fixture Time at 24℃: 32 minute
Operating Temperature: -50 ℃ – 120 ℃
Gap Filling Capacity: Up to 9mm
Mixed Density: 0.99 g/cm3
Physical Properties
| Part-A | Part-B |
Viscosity at 24℃ | 100,000 - 150,000 | 20,000 – 60,000 |
Color | Off-White | Blue, Black |
Density at 24℃ | 0.98 g/cm3 | 1.08 g/cm3 |
Mix Ratio by Volume | 10 | 1 |
Mix Ratio by Weight | 9 | 1 |
Chemical Resistance
1/ Excellent resistance to: 2/ Susceptible to:
Acids and Bases (3-10pH) Polar Solvents
Hydrocarbons Strong Acids and Bases
Salt Solutions
Recommended for:
Metals: Aluminium, CRS, Magnesium, stainless steel.
Plastics: ABS, Acrylics, PC, PVC
FRP: epoxy-based, PE-based, Vinyl ester - based, PU based.
Cartridge packing size:
Dual 10:1 PBT cartridge 50ml
Dual 10:1 PBT cartridge 250ml
Storage & Shelf life:
The shelf life of LD-1232 stored at 16℃- 24℃ is 9 months from the date of manufacture.
Cool storage at around 12℃ can extend the shelf life.
Long-term exposure above 23℃ will reduce the shelf life.
Prolonged exposure of activators, including cartridges that contain activators, above 35℃ quickly diminishes the reactivity of the product, and should be avoided.
This product should never be frozen.
General Description
SpiderAdhesive LD-1232 is a third generation, low shrinkage and low odor, two-part 10:1, Metal-bonding, MMA structural adhesive. The shrinkage is below 5%.
SpiderAdhesive LD-1232 can be used for structurally bonding metals without a primer and engineering plastics and composite assemblies with little to no surface preparation.
SpiderAdhesive LD-1232 provides a well balanced performance in a broad temperature range and is one of very a few products in the world that can meet all three highest metal bonding standards for automotive industry.
SpiderAdhesive LD-1232 is designed with the advanced technology in the world and manufactured in China with the most advanced process and with imported raw materials.
